Novel correction method for X-ray beam energy fluctuation of high energy DR system with a linear detector

A high energy digital radiography (DR) testing system has generated diverse scientific and technological interest in the field of industrial non-destructive testing. However, due to the limitations of manufacturing technology for accelerators, an energy fluctuation of the X-ray beam exists and leads to bright and dark streak artifacts in the DR image. Here we report the utilization of a new software-based method to correct the fluctuation artifacts. The correction method is performed using a high pass filtering operation to extract the high frequency information that reflects the X-ray beam energy fluctuation, and then subtracting it from the original image. Our experimental results show that this method is able to rule out the artifacts effectively and is readily implemented on a practical scanning system.     

Density measurement for polymers by magneto-Archimedes levitation: Simulation and experiments

In a magneto-Archimedes levitation device, a polymer can be levitated in a paramagnetic medium, and its equilibrium levitated height is mainly related to its density. Here, a novel density measurement method for polymers via magneto-Archimedes levitation is proposed, in which the relationship between the density and the levitated height is determined through numerical simulation. COMSOL software is employed to simulate the distribution of magnetic field in the device, and FLUENT-EDEM multiphase software is adopted to predict the polymer's levitated height. A 3rd-order polynomial equation is fitted by simulation results for density calculation. Several experiments with different devices, different magnets, different mediums, and various polymers were carried out to verify the proposed method. Experimental results showed that the proposed method has high accuracy (0.0060–0.0130 g/cm³) in density measurements for small polymer samples (∼25 mm³). In general, the proposed method has prospects of broad application in polymer density-based testing.     

Optical testing of star sensor (II): Alignment of star sensor from off-line pictures taken in orbital test

Alignment error of an image sensor relative to the optical axis of a star sensor head and alignment errors between four heads were calculated from pictures taken in an orbital experiment. When comparing the image sensor alignment parameters in the orbital test and a ground test, both values matched well. By determining the relative relationship of the four heads using four pictures taken at the same moment in orbit and uploading the parameters to the star sensor system in orbit, the estimated attitude error was improved from 0.29 to 0.17°, though the accuracy was limited by the ±0.2° determination accuracy of the satellite itself. We estimated the attitude determination accuracy from separation angles between boresights of the four heads, calculated from pattern matching between downloaded pictures and a star catalogue. The estimated accuracy, in terms of potential optical performance, was 0.60 arcmin at 3σ, which is sufficient to satisfy the specification of 1 arcmin.     

Nonlinear optical characterization of cluster dynamic in water in oil microemulsion by a pump probe laser beam technique

We present a new pump probe laser beams configuration for the nonlinear optical characterization of microemulsions. We detect the variation of the on-axis optical intensity of the probe beam as generated by the concentration profile induced in an optically thin film of microemulsion by the pump beam. A mathematical model has been introduced to describe the phenomenon. The technique allows the determination of both Kerr-like optical nonlinearity and time constants and, therefore, it gives information both on cluster dimension and their shape. We discuss its application to WAD (water/AOT/decane, where AOT denotes sodium-bis-di-ethyl-sulfosuccinate) with the application of a strong electric field of optical source. Comparison between theoretical predictions and experimental results confirms the presence of giant optical nonlinearity in the absence of turbidity divergence. Chainlike shape of clusters, of the kind already reported with the application of strong electric field, could justify this result. Received 26 October 2002 RID="a" ID="a"e-mail: vicari@na.infn.it     

A New Probe for Mechanical Testing of Nanostructures in Soft Materials

We report a new application of the optical tweezers, where a harmonically driven oscillating tweezer is combined with the forward light scattering and lock-in amplification techniques, for probing the mechanics of nanostructures in soft materials in a broad frequency range. Model independent dynamic moduli G and G of the material at a localized, sub-micron area can be measured directly from the displacement and the phase shift of the particle in the oscillating trap. The probe particles can be as small as 200nm and the displacement of the particle was in the range of a few nanometers. To illustrate the new methodology, we show the microscopic viscoelastic properties of a transient polymer network in the vicinity of a silica bead.     

Optical Single-Sideband Modulators and Their Applications

We review our recent work in the implementation of optical single-sideband (OSSB) modulation and in the application of this modulation format to microwave photonics and optical testing systems. We have developed an enhanced OSSB modulator for wide-band operation, the so-called bidirectional OSSB modulator, and a simplification of this scheme for narrow-band applications. These OSSB modulators are based on the use of a standard single-electrode Mach-Zehnder electro-optic modulator (MZ-EOM) and passive fiber-optic components. In both designs, the OSSB operation is shown to be independent of the MZ-EOM bias. Therefore, the optical modulation depth at the output of the device can be enhanced using minimum transmission biasing to provide suppression of the optical carrier. Finally, we demonstrate the application of OSSB modulators to the improvement of microwave/millimeter-wave subcarrier multiplexing fiber-optic links and to narrow-band fiber radio systems. In addition, we analyzed the feasibility and the limitations of an optical vector network analysis technique based on OSSB modulation that can provide sub-picometer wavelength resolution.     

Novel quantitative non-destructive testing method for composite structures

A novel QNDT (quantitative non-destructive testing) method is developed that is combined with a phase-shifting shearing speckle and thermograph, and, it aims at the detection of faults such as cracks, voids, delamination and weak areas. The technique is immune to ambient noise and is suitable for measuring the in situ environment. Some different depth defects that would produce deformation differing from other positions could be found with shearing speckle when the sample is loaded, however, a thermograph based on the thermal resistance effect of a defect can detect only those varisized defects embedded deeply in the composite structure by measuring the surface temperature distribution. The resolution is examined for artificial delaminated defects in carbon-fiber composite structures using a phase-shifting shearing speckle and thermograph. The experimental results have demonstrated that the technique is effective for revealing defects in composite structures.     

Display and applied holography in museum practice

Possible applications of holography for cultural heritage study, demonstration and restoration, particularly in practical museum applications, are discussed. In this respect two main applications of holography are of interest: display holography and technical holography. The latter includes holographic NDT methods, three-dimensional measurements of objects, memory systems, and so on.     

Evaporation in addition impression silicones

Summary The effect of weight loss on the dimensional stability of some addition-polysiloxanes used as impression materials in dentistry is studied. We show that polymerization is not the only factor affecting the shrinkage of these materials. An explanation for the time-dependent weight function is given.     

Speckle shear interferometry

A number of speckle shear methods and their applications to ndt are discussed. Experiments using multiple apertures with custom-made optical elements have shown that in-plane displacement, slope and curvature patterns can be obtained by filtering through appropriate haloes.